67 65 019 Removing and installing/replacing drive for left or right roller sun blind

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DOOR TRIM PANEL

Release screws (1).

Tightening torque 51 16 20AZ .

Release screw (2).

Tightening torque 51 16 19AZ .

Fig 1: Identifying Door Window And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Pull flex shaft out of drive.

Installation:

Make sure flex shaft is correctly seated in drive.

Fig 2: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Withdraw flex shaft (1) from gearing (2).

Installation:

Make sure flex shaft (1) is correctly seated in gearing (2).

Fig 3: Identifying Flex Shaft And Gearing

Courtesy of BMW OF NORTH AMERICA, INC.