22 11 011 Replacing left engine mount (N63) AWD
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Lower FRONT AXLE SUPPORT
Release bolt (1) and remove engine mount.
IMPORTANT:
Installation:
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the bolt connection (engine mount/engine support arm).
Tightening torque 22 11 2AZ .
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the bolt connection (engine mount/engine support arm).
Tightening torque 22 11 2AZ .
Installation:
Rubber section (1) of engine mount must point to middle of vehicle.