51 71 015 Removing and installing/replacing left or right underbody panelling
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove REAR UNDERBODY PROTECTION
Unscrew all bolts.
Tightening torque 51 75 1AZ .
Remove underbody panelling (1).
Installation note:
Make sure underbody panelling (1) is correctly seated.