Windscreen removal system "Roll Out 2000"
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Both paint and ergonomic and health-endangering damage is minimized with the "Roll Out 2000" system.
Sourcing reference:
see BMW Aftersales Assistance Portal (ASAP) - Service/Technical - Workshop Equipment
WARNING:
Follow SAFETY INSTRUCTIONS for working on vehicles with airbag systems (risk of injury).
IMPORTANT:
Take care when handling sharp-edged tools and cutting wire (risk of damage to head airbag and window glass).
IMPORTANT:
Always keep both suction cups dry and clean to ensure their optimum adhesion on the windscreen.
Suction cup may not be applied at the damaged point (crack in window glass).
Lubricate spool if lock rattling becomes too loud.
Always wear safety goggles and protective gloves for your own safety.
Suction cup may not be applied at the damaged point (crack in window glass).
Lubricate spool if lock rattling becomes too loud.
Always wear safety goggles and protective gloves for your own safety.