Attaching wire in hoisting winch with double coil
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
- Bend over cutting wire end (1) approximately 10 mm and insert into slot of spool (2)
- Repeat process with other end of wire (1) and second spool (2)
- Wind cutting wire (1) onto spools by hand until cutting wire (1) is under slight tension