3.7 Nozzle preparation
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
When not using standard nozzle C, prepare plastic nozzle(s) for shaping the adhesive bead.
Follow the vehicle-specific repair instructions!
Black ceramic glass impermeable to UV light is located on the peripheral zone of the inside edge of the window to protect the adhesive bead.
Ceramic glass must not be damaged.