Spacer buffer
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
To prevent windscreen breakage and wind noise, completely remove any remnants of removed spacer buffers and maintain the installation position exactly.
Installation position of spacer buffers (1) is determined on body side with marks (arrows) on A-pillar (2) and on cross member (3).
Spacer buffer to be used 5x5x20 mm.