Replacing model designation

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Mark position of model designation (1) with yellow plastic adhesive tape (2).

Coat separating string or strong yarn with tensides (e.g. washing-up liquid).

Cut through adhesive layer and remove model designation (1).

Refer to "Installation" operation for further procedure.

Fig 1: Identifying Model Designation And Yellow Plastic Adhesive Tape

Courtesy of BMW OF NORTH AMERICA, INC.