64 11 943 Replacing evaporator temperature sensor

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM PANEL FOR PEDAL ASSEMBLY

NOTE: For purposes of clarity, picture shows heating and air-conditioning unit removed.

Disconnect plug connection (1) from evaporator temperature sensor.

Pull evaporator temperature sensor with flat-nose pliers out of heating and air-conditioning unit housing (1).

Fig 1: Identifying Plug Connection And Air-Conditioning Unit Housing

Courtesy of BMW OF NORTH AMERICA, INC.