34 00 012 Parking brake function check

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Connect BMW diagnosis system.
Carry out vehicle test
Call up "Workshop braking-in" service function.
Start breaking-in program.
(Parking brake indicator lamp in instrument cluster flashes at low frequency)
Drive vehicle onto brake analyzer and pull parking brake button once.
Parking brake is applied at approx. 15 km/h with reduced force.
(Parking brake indicator lamp in instrument cluster flashes at high frequency)
Breaking-in procedure takes 3 minutes.
Breaking-in procedure can be terminated by pressing the parking brake button.
Delete fault memory.