61 31 334 Removing and installing or replacing grip cover for gear selector switch

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Carefully unclip cover (1) using special tool 00 9 322 on points (2) from gear selector switch (3) and remove in the direction of arrow.

Fig 1: Removing Gear Selector Switch Knob Cover Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanism (1) must not be damaged or missing.

Fig 2: Identifying Gear Selector Switch Knob Catches

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanism (1) and guide (2) must not be damaged or missing.

Fig 3: Identifying Engagement Lugs And Guide

Courtesy of BMW OF NORTH AMERICA, INC.