61 31 041 Removing and installing operating element for assist system

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks:

Remove DECORATIVE STRIP ON INSTRUMENT PANEL ON LEFT

Carefully lever driver assist system (1) out with special tool 00 9 317 .

Disconnect plug connection behind and remove driver assistance system (1).

Installation note:

Make sure driver assistance system (1) is correctly seated.

Fig 1: Removing Driver Assist System Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.