LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 462 (General Electrical System - Repair) >> Headlight Washer System >> 61 67 200 Removing and installing/replacing washer jet for Night Vision camera

61 67 200 Removing and installing/replacing washer jet for Night Vision camera

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1).

Remove high-pressure nozzle (2) from Night Vision camera (3).

Installation note: 

New washer jet is already preset.

Run a function check.

Fig 1: Identifying High-Pressure Nozzle With Screws And Night Vision Camera
G06895149Courtesy of BMW OF NORTH AMERICA, INC.