61 35 980 Removing and installing/renewing aerial for comfort access system on left or right

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM PANEL FOR COVER ON SIDE MEMBER

Disconnect plug connection (1).

Unlock and remove aerial for comfort access system (2) from bracket (3).

Installation note:

Make sure interior aerial for comfort access system (2) is correctly seated in designated holder (3).

Fig 1: Identifying Comfort Access System With Plug Connection And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.