00 00... Body: Check for corrosion (except cavities)

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Visually inspect underbody and add-on parts (brake lines, exhaust branch, sills) for corrosion and check for damage.
Check wheel arches for corrosion.
Open doors and check A-, B- and C-pillars for corrosion, especially door hinges.
Check door window frame for corrosion, folding back door seal slightly if necessary.
Check outer body for stone chipping, scratches or damage to paintwork and associated corrosion.

IMPORTANT: If damage to the underbody is identified:

If necessary, remove trim panels from underbody.
Check bracket as well as brake- and fuel lines for damage, corrosion and correct installation position.

Rectify identified faults after consulting with customer and issue a separate invoice.