LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 461 (Maintenance And General Information - Repair) >> Check, Add, Change Transmission Oil >> 00 11... Checking/topping up oil level in rear axle final drive

00 11... Checking/topping up oil level in rear axle final drive

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: DANGER OF POISONING  if oil is ingested/absorbed through the skin!
RISK OF INJURY  if oil comes into contact with eyes and skin!
IMPORTANT: Risk of damage!
To avoid serious damage to the rear axle final drive, it is essential to use only APPROVED OILS in the rear axle final drive.

Open screw plug (1).

Tightening torque 33 11 2AZ

Check oil level.

If necessary, pour in final drive oil up to lower edge of opening for oil filler plug (1).

Installation note: 

Replace screw plug (1) with O-ring.

Fig 1: Identifying O-Ring Screw Plug
G08494288Courtesy of BMW OF NORTH AMERICA, INC.