67-1 31 Drive, seat adjustment
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - DRIVE, SEAT ADJUSTMENT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| Drives, front seat | ||||
| 1AZ Drive for seat height adjustment to seat | F01 / F02 / F03 / F04 / F07 / F10 / F11/F18 | 8 Nm | ||
| 2AZ Drive for seat cushion tilt adjustment to seat | F01 / F02 / F03 / F04 / F07 / F10 / F11/F18 | 8 Nm | ||
| 3AZ Drive for head restraint height adjustment to seat | F01 / F02 / F03 / F04 / F07 / F10 / F11/F18 | 2.5 Nm | ||
| 4AZ Drive for backrest upper section adjustment to seat | F01 / F02 / F03 / F04 / F07 / F10 / F11/F18 | 10 Nm | ||
| Drives, rear seat | ||||
| 10AZ Drive for longitudinal seat adjustment to seat rail | F01 / F02 / F03 / F04 / F07 | 7 ±0.5 Nm | ||
| 11AZ Flex shaft for longitudinal seat adjustment to seat rail | F01 / F02 / F03 / F04 / F07 | 28±3 Nm | ||
| 12AZ Drive for seat cushion tilt adjustment to seat frame | F01 / F02 / F03 / F04 / F07 | 12 ±1.2 Nm | ||
| 13AZ Threaded rod to seat angle adjustment | F01 / F02 / F03 / F04 / F07 | 22 ±3 Nm | ||
| 14AZ Drive for head restraint height adjustment | F01 / F02 / F03 / F04 / F07 | 3.1 ±0.3 Nm | ||
| 15AZ Drive for backrest angle adjustment | F01 / F02 / F03 / F04 / F07 | 12 ±1.2 Nm | ||
| 16AZ Adjusting unit, backrest angle adjustment | F01 / F02 / F03 / F04 / F07 | 20 ±2 Nm |