51 35 Electrical window systems Operation, rear
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ELECTRICAL WINDOW SYSTEMS OPERATION, REAR
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Flat motor to power window regulator | F01 / F02 / F04 / F10 / F11 / F18 | Oval-head screw for thermoplastic | 5.5 Nm | |
| 2AZ Power window regulator to door | F01 / F02 / F04 / F10 / F11 / F18 | Oval-head screw, self-locking | 11.8 Nm | |
| F25 | 9.5 Nm | |||
| 3AZ Side window, rear, non-opening (bottom) | F01 / F02 / F04 / F10 / F11 / F18 | 7.6 Nm | ||
| 4AZ Cover, window frame, B-pillar | F01 / F02 / F04 / F10 / F11 / F18 | 2.5 Nm | ||
5AZ Cover, window guide web
|
F01 / F02 / F04 / F10 / F11 / F18 | 3 Nm | ||
| 6AZ Roller sunblind | F01 / F02 / F04 | 9 Nm | ||
| 7AZ Cover, window frame (B-pillar) to SBL, rear | F01 / F02 / F04 | M5x30 | Oval-head screw | 2.5 Nm |
| F01 / F02 / F04 | ST4.8x19 | Sheet metal screw | 2 Nm | |
| 8AZ Guide rail to end plate | F01 / F02 / F04 | Oval-head screw for thermoplastic | 3 Nm | |
| F01 / F02 / F04 ST4.8x19 | Sheet metal screw | 2 Nm | ||
| 9AZ Roller shell | F01 / F02 / F04 | Oval-head screw for thermoplastic | 3 Nm | |
| F01 / F02 / F04 Flat-head screw | 8 Nm | |||
| 10AZ Window guide rail rear, to window partition web | F01 / F02 / F04 | 8 Nm | ||
| 11AZ Holder to inner door panel | F01 / F02 / F04 / F10 / F11 / F18 | 5.5 Nm | ||
| 12AZ Power window regulator to door | F03 | Hexagon screw | 18.5 Nm | |
| 13AZ Side window, rear, non-opening (top) | F10 / F11 / F18 | 2.5 Nm | ||
| 14AZ Cover, window frame (C-pillar) | F11 | 1.5 Nm |