41 62 Rear lid
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR LID
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Tailgate to tailgate hinge | F01 / F02 / F03 / F04 / F10 / F12 / F13 / F06 | M8x19.5 8.8 | 18.5 Nm | |
| F11 | ISA M8x22 | 18.5 Nm | ||
| F07 | M8 countersunk screw | 18.5 Nm | ||
| F07 | M10 x 34 | 36 Nm | ||
| 2AZ Tailgate hinge to body | F01 / F02 / F03 / F04 / F10 / F12 / F13 / F06 | nut M8 | 18.5 Nm | |
| F07 | M8 x 20 | 18.5 Nm | ||
| F11 | ISA M8x22 | 27 Nm | ||
| F11 | ISA M6x12 | 10 Nm | ||
| 2AZ Holder to hinge | F12 | M6x12 | 7.6 Nm | |
| 2AZ Hinge holder to body | F12 | M8x16 | 18.5 Nm | |
| 3AZ Hinge bolt | F01 / F02 / F03 / F04 / F10 / F13 / F06 nut | M8 | 18.5 Nm | |
| 4AZ Tailgate lower section to hinge | F07 | M8 x 17 | 18.5 Nm | |
| 5AZ Tailgate lower section hinge to tailgate | F07 | nut M8 | 18.5 Nm | |
| 6AZ Limit position, tailgate to body | F07 | M6 x 21 | 6 Nm | |
| F07 | nut M6 | 6 Nm | ||
| F07 | M12x1.5 | 16 Nm | ||
| 7AZ Ball pin for gas pressure spring to body | F07 | M10 | 36 Nm | |
| 8AZ Earth cable to hinge | F12 | M6 | 8 Nm |