41 61 Engine compartment lid
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE COMPARTMENT LID
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine compartment lid to hinge | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 | M8 | 20 Nm | |
| 2AZ Hinge upper section to hinge lower section | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 | M8 | 18.5 Nm | |
| 3AZ Hinge lower section to body to 09/2010 | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 | M8 | 20 Nm | |
| 3AZ Hinge lower section to body, rear screw connection, from 10/2010 | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 | M8, Strength class 10.9 | 28 Nm | |
| 3AZ Hinge to body | F12 / F13 | M8, Strength class 10.9 | 28 Nm | |
| 4AZ Actuator to hinge upper section | F01 / F02 / F04 / F06 / F10 / F11 | M8 x 45 | 17 Nm | |
| 5AZ Actuator to holder | F01 / F02 / F04 / F06 / F10 / F11 | M8 x 24 | 17 Nm | |
| 6AZ Holder to hinge lower section | F01 / F02 / F04 / F06 / F10 / F11 | M8 x 14 | 18.5 Nm | |
| 7AZ Holder, damper to hinge upper section | F01 / F02 / F04 / F06 / F10 / F11 | M8 x 14 | 18.5 Nm | |
| Engine compartment lid with active pedestrian protection (from 04/11): | ||||
| 8AZ Actuator to holder | F01 / F02 / F04 / F06 / F10 / F11 / F12 / F13 / F18 | M6 x 16 | 7.6 Nm | |
| 9AZ Lever to hinge, left | F01 / F02 / F04 / F06 / F10 / F11 / F12 / F13 / F18 | M8 | 23 Nm | |
| 10AZ Lever to hinge, right | F01 / F02 / F04 / F06 / F10 / F11 / F12 / F13 / F18 | M8 | Important! Left-hand threads. | 23 Nm |