33 33 Rear Axle Suspension
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle support with rubber mounts to body | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M14 | 165 Nm | |
| F25 | M12 | Replace screws. | ||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Compression strut, front, to body | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M10 | Replace screws. | |
| Jointing torque | 56 Nm | |||
| Angle of rotation | 45 ° | |||
| F25 | M12 | 100 Nm | ||
| 3AZ Rear compression strut to body | F03 | M10 | Replace screws. | |
| Jointing torque | 56 Nm | |||
| Angle of rotation | 45 ° | |||
| 4AZ Vibration absorber to rear axle support, front | F10 / F11 / F12 / F13 | M8 | 19 Nm | |
| 5AZ Reinforcement plate to rear axle support | F10 M5 / F12 M6 / F13 M6 | M10 | 56 Nm | |
| 6AZ Reinforcement plate on cross reinforcement | F12M | M12 | Replace screws | |
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90 ° |