33 17 Rear axle differential mountings
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE DIFFERENTIAL MOUNTINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear differential to rear axle carrier, front | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | FOLLOW REPAIR INSTRUCTION. Replace screws. |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90 ° | |||
| F25 | M12 | Follow repair instruction. | 100 Nm | |
| 2AZ Rear differential to rear axle carrier, rear | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M14 | FOLLOW REPAIR INSTRUCTION. Replace nut. |
175 Nm |
| F25 | M14 | Follow repair instruction. Replace nut. |
165 Nm | |
| 3AZ Vibration absorber on front right rear axle final drive | F10 / F11 | M12 | Replace nut. | 56 Nm |
| 4AZ Vibration absorber to vibration absorber holder | F25 | M14 | 100 Nm | |
| 5AZ Front adapter to rear axle differential | F10 M5 / F12 M6 / F13 M6 | M12 | Replace screws. | 100 Nm |
| 6AZ Rear adapter to rear axle differential | F10 M5 / F12 M6 / F13 M6 | M12 | 69 Nm |