33 34 Integral Active Steering
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INTEGRAL ACTIVE STEERING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Integral active front steering to rear axle carrier (Torx screw) | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M14 | 165 Nm | |
| 2AZ Integral active front steering to rear axle carrier (bottom) | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Jointing torque | 100 Nm |
| Angle of rotation | 90 ° | |||
| 3AZ Integral active front steering to rear axle carrier (press-in stud) | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M14 | 165 Nm | |
| 4AZ Grounding strap to integral active front steering | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M6 | 8 Nm | |
| 5AZ Control unit, integral active front steering, to body | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M6 | 5.7 Nm |