LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 441 (Front Axle - Repair) >> Struts With Rubber Mounts >> 31 12 002 Removing and installing/replacing top left wishbone >> Adjusting normal position

Adjusting normal position

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Wishbone Normal Position Dimension
G08504612Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

The graphic shows the left wishbone.

The protrusion is missing on the right side. Measure to the middle of the wishbone.

Secure wishbone (1) to body vertically to dimension (A) = 90 mm.