31 60 Output shaft
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OUTPUT SHAFT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output shaft console to engine oil sump | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F25 | M8 | 19 Nm | |
| 2AZ Output shaft to wheel hub | F01 / F02 / F06 / F07 / F10 / F11 / F12 / F13 / F25 | M16 | Observe relevant removal/installation service information. Replace collar bolt and spring. |
|
| Jointing torque | 210 Nm | |||
| Angle of rotation | 90 ° |