31 10 Front Axle Suspension
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FRONT AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front axle support to engine support (screw connection, front, middle, rear) | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Observe repair instructions. | 100 Nm |
| F25 | M12 | Replace screws. | ||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90 ° | |||
| F10 M5 / F12 M6 / F13 M6 | M10 | Replace screws. | ||
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Thrust zone to front axle support | F01 / F02 / F04 / F07 / F10(without M5) / F11 / F12 (without M6) / F13 (without M6) | M8 | Replace screws. | |
| Jointing torque | 15 Nm | |||
| Angle of rotation | 90 ° | |||
| F10 M5 / F12 M6 / F13 M6 | M10 | Replace screws. | ||
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90 ° | |||
| F25 | M12 | 110 Nm | ||
| 3AZ Acoustic strut to front axle support | F01 / F02 | M8 | ||
| Jointing torque | 15 Nm | |||
| Angle of rotation | 90 ° |