31 35 Anti-roll bar
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Retaining bar for stabilizer to front axle carrier/steering gear | F01 / F02 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | |||
| Angle of rotation | 105 ° | |||
| F03 | M12 | Replace screw. | ||
| Jointing torque | 100 Nm | |||
| F03 | M14 | Replace screw. | ||
| Jointing torque | 165 Nm | |||
| F25 | M10 | 56 Nm | ||
| 2AZ Stabilizer link to stabilizer / damper | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | |||
| Angle of rotation | 45° | |||
| 3AZ Anti-roll bar link to anti-roll bar | F25 | M12 | Replace nut. | 100 Nm |
| 4AZ Anti-roll bar link to damper | F25 | M12 | Replace nut. | 108 Nm |