24 40 Torque converter
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TORQUE CONVERTER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torque converter to flywheel | GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z | M10 10.9 |
Replace converter screws. (Remove adhesive residue from thread, if applicable) |
56 Nm |
| GA8HP90Z / GA6HP26Z(AWD) | M10 10.9 |
Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | |
| F30 / F35 N20 GA8HP45Z | M10 10.9 |
Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | |
| 2AZ Electrical machine to flywheel | GA8P70H | M10 | Replace hexagon nuts. (Remove adhesive residue from thread, if applicable) |
56 Nm |