13 54 020 Removing and installing/sealing right throttle valve assembly (N63): Notes

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Switch off ignition.
Remove right INTERCOOLER .

NOTE: Picture shows the left throttle valve assembly, the procedure for the right side is identical.

Unlock plug (1) and remove.

Unfasten screws (2).

Tightening torque 13 54 1AZ .

Remove throttle valve assembly (3).

Installation:

Fig 1: Identifying Throttle Valve Assembly With Plug And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Check plug connection (1) for coolant remnants. If necessary, clean plug connection (1) with compressed air.