13 51 Injection pump, control
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ High-pressure pump to cylinder head cover | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | M6 | Replace screws. Tighten bolts to final torque/angle in uniform increments of 90°. Follow relevant repair instructions. |
12 Nm |