11 13 Oil sump
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug | N63 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ Oil sump upper part to crankcase | N63 | M8 | 25 Nm | |
| 3AZ Oil sump bottom section to oil sump upper part | N63 | M8 | Replace microencapsulated screws | 27 Nm |
| 4AZ Oil deflector to oil sump upper part | N63 | M6 | 10 Nm | |
| 5AZ Screw plug, oil channel, to oil sump upper part | N63 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ Oil condition sensor to oil sump bottom section | N63 | M6 | Replace O-ring | 8.5 Nm |