11 14 Case Covers
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Jump guard to crankcase | N63 | M6 | 10 Nm | |
| 2AZ Gear case cover to crankcase, bottom | N63 | M8 | 21 Nm | |
| 3AZ Gear case cover to cylinder head, top | N63 | M6 | 10 Nm | |
| 4AZ End cover (oil) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 5AZ End cover (water) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |