5040 Open-end wrench

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0495551 335040 Open-end wrench Minimum set: Mechanical tools MW

In conjunction with: 33 5 070

NOTE: Open-end spanner SW50 with retaining clip For releasing and tightening down the insert nuts for the screw connection of the propeller shaft on the rear axle final drive. [Released]

Storage Location: A18

SI number: 01 21 06 (300)

Fig 1: Identifying Open-End Wrench (0495551)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

3 = 0495583 Pin
NOTE: (Pin with chain (2 pieces)) [Released]
2 = 0495582 Clip
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
1 = 0495581 Basic body
NOTE: [Released]