LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 410 (Rear Axle - Special Tools) >> Rear Axle >> 4120 Device

4120 Device

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0492388 334120 Device MW

NOTE: For removing and installing the ball joint in the wishbone [Discontinued]

SI number: 01 01 89 (989)

Consisting of:

  1. = 0492389 Shaped element
    NOTE: For positioning when pressing out the ball joint [Discontinued]
  2. = 0492390 Bush
    NOTE: (Pressure bushing) For pressing the ball joint out of the wishbone [Discontinued]
    Fig 1: Identifying Device (0492388)
    G06876290Courtesy of BMW OF NORTH AMERICA, INC.
  3. = 0492391 Shaped element
    NOTE: For positioning the wishbone when pressing in the ball joint [Discontinued]
  4. = 0492392 Bush
    NOTE: (Pressure bushing) For pressing the ball joint into the wishbone [Discontinued]