LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 410 (Rear Axle - Special Tools) >> Rear Axle >> 3200 Tool

3200 Tool

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0492260 333200 Tool MW

NOTE: (Press-out/-in tool set) For pressing the rubber mount out of and into the control arm special tools 33 3 202 and 33 3 203 for E87 and E90 [Released]

Storage Location: B13

SI number: 01 05 90 (207)

Consisting of:

  1. = 0492261 Bush
    NOTE: For accommodating control arm when pressing out rubber mount Series: E31 Discontinued, only available as part of complete tool [Cannot be ordered individually]
  2. = 0492262 Synchronizing key
    NOTE: For pressing out rubber mount Series: E31, E46, E85, F01, F02 Discontinued, only available as part of complete tool [Cannot be ordered individually]
  3. = 0492263 Holding sleeve
    NOTE: (spacer sleeve) For pressing rubber mount into control arm Series: E31, E46, E85, F01, F02 Discontinued, only available as part of complete tool [Cannot be ordered individually]
    Fig 1: Identifying Tool (0492260)
    G04739444Courtesy of BMW OF NORTH AMERICA, INC.