2110 Device
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
0492169 332110 Device Minimum set: Mechanical tools MW
Replaced by: 83300496062
NOTE:
(Extraction and pulling device) For removing and installing output shaft in drive flange as well as for removing front wheel bearing unit. Replaced by 33 2 200. (0 496 062) [Replaced]
Storage Location: C14, C13, C38
Consisting of:
- 9 = 0492178 SpindleNOTE: For installing / model series: E36, E46 Replaced by 33 2 206. (0 496 069) [Replaced]
- 8 = 0492177 SpindleNOTE: (Spindle for installation) Model series: E31, E52, E53, E60, E61, E65, E66, E67, E83 Replaced by 33 2 205. (0 496 068) [Replaced]
- 7 = 0492176 Shaped partNOTE: (Shaped part) Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85 Replaced by 33 2 207 / 0 496 070 [Replaced]
- 6 = 0492175 BridgeNOTE: New version 09/98 Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, E90, RR1 Replaced by 332 201 / 0 496 063 [Replaced]
- 5 = 0492174 NutNOTE: (Nut with bearing) Model series: E30, E31, E32, E36, E38, E39, E46, E52, E53, E60, E61, E65, E66, E67, E83, E85, RR1 Replaced by 33 2 208 / 0 496 071 [Replaced]
- 4 = 0492173 SpindleNOTE: For installing / model series: E30 Replaced by 33 2 204 / 0 496 067 [Replaced]
- 1 = 0492172 Shaped partNOTE: (Shaped part) Model series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E85, RR1 Replaced by 33 2 117. (0 492 176) [Replaced]
- 1 = 0492171 BridgeNOTE: Replaced by 33 2 116. (0 492 175) [Replaced]
- 1 = 0492170 SpindleNOTE: (Pressure spindle) For pressing out. Series: E30, E31, E32, E36, E38, E39, E46, E53, E65, E66, E67, E83, E85 Replaced by 33 2 203. (0 496 066) [Replaced]