0030 Device

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0496495 330030 Device MW

NOTE: For removing and installing rubber mount of rear axle final drive mounting at rear. [Released]

Storage Location: B25

SI number: 01 18 08 (482)

Consisting of:

= 0496507 Washer

Fig 1: Identifying Device (0496495)
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Removing rubber mount [discontinued]
= 0496508 Bush
NOTE: Removing rubber mount [discontinued]
= 0496509 Washer
NOTE: Installing rubber mount [discontinued]
= 0496510 Washer
NOTE: (Shaped washer) Installing rubber mount [discontinued]
= 0496511 Spindle
NOTE: (Spindle M14x1.5) Discontinued, only available via complete tool [not available separately]
= 0496512 nut
NOTE: (Nut M14x1.5 with thrust bearing) Discontinued, only available via complete tool [not available separately]