0020 Device

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0496494 330020 Device MW

NOTE: For removing and installing rubber mounts in rear axle final drive mounting at front. [Released]

Storage Location: C25

SI number: 01 18 08 (482)

Consisting of:

= 0496500 Washer
NOTE: Removing rubber mount [blocked]

Fig 1: Identifying Device (0496494)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0496502 Washer
NOTE: (Shaped washer) Installing rubber mount [blocked]
= 0496503 Washer
NOTE: Installing rubber mount [blocked]
= 0496501 Bush
NOTE: Removing rubber mount [blocked]
= 0496504 Guide
NOTE: (guide bush) Installing rubber mount [blocked]
= 0496505 Spindle
NOTE: (Spindle M12x1.5) spindle length 205 mm [blocked]
= 0496506 nut
NOTE: (Nut M12x1.5 with thrust bearing) [blocked]