4360 Puller

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0495599 244360 Puller Minimum set: Mechanical tools MW

NOTE: For withdrawing output shaft seal (4x2). [Released]

Storage Location: A24

SI number: 01 02 07 (334)

Consisting of:

4 = 0496116 Spindle
NOTE: [Discontinued]

Fig 1: Identifying Puller (0495599)
Courtesy of BMW OF NORTH AMERICA, INC.

= 0496113 Basic body
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]
= 0496114 Claw
NOTE: (Claw (4 pieces)) Discontinued, only available as part of complete tool [Cannot be ordered individually]
= 0496115 Screw
NOTE: Discontinued, only available via complete tool [cannot be ordered separately]