4320 Puller

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0495496 244320 Puller MW

NOTE: For withdrawing output shaft seal (four-wheel drive). [Discontinued]

Storage Location: C23

SI number: 01 02 07 (334)

Consisting of:

= 0495569 Basic body
NOTE: [Discontinued]

Fig 1: Identifying Puller (0495496)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0495570 Ring
NOTE: (Coupling ring) [discontinued]
= 0495571 Spindle
NOTE: [Discontinued]
= 0495572 Hook wrench
NOTE: [Discontinued]