2350 Puller

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

0494201 242350 Puller Minimum set: Mechanical tools MW

NOTE: For pulling out the radial shaft seal on torque converter and on output flange [Released]

Storage Location: A46

SI number: 01 14 01 (766)

Consisting of:

= 0494202 Puller
NOTE: [Discontinued]

Fig 1: Identifying Puller (0494201)
Courtesy of BMW OF NORTH AMERICA, INC.
= 0494203 Spindle
NOTE: (Spindle M12 x 65 with ball head) Discontinued, only available via complete tool [Not available separately]
= 0494204 Synchronizing key
NOTE: [Discontinued]
= 0495597 Synchronizing key
NOTE: Transmission: GA6L45R (GM6) Liquidation of existing inventory and then available only as a complete tool set 24 2 350 (83 30 0 494 201) - as of 06.06.2012. [Not available separately]