LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 740Lxi >> Repair and Diagnosis >> External Pages >> Different car >> Section 393 (Cooling System - Repair) >> Coolant, Checking Cooling System >> 17 00 039 Venting and filling cooling system with vacuum filling unit >> N63 B40/B44 O 1 only

N63 B40/B44 O 1 only

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Check coolant level when the engine has cooled down. Adjust coolant level to (A) approx.110 mm - 160 mm below the upper edge of the coolant filler neck. Use a tape measure where appropriate.

Fig 1: Identifying Coolant Level
G08504260Courtesy of BMW OF NORTH AMERICA, INC.


Close coolant expansion tank.

Installation note: 

Close the sealing cap (1) until the arrows line up.

Fig 1: Identifying Sealing Cap Closed Position
G08504261Courtesy of BMW OF NORTH AMERICA, INC.