24 40 Torque converter
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TORQUE CONVERTER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torque converter to flywheel | GA6HP19Z / GA6HP26Z / GA6HP32Z / GA8HP45Z / GA8HP70Z | M10 10.9 |
Replace converter screws. (Remove adhesive residue from thread, if applicable) |
56 Nm |
| GA8HP90Z / GA6HP26Z(AWD) | M10 10.9 |
Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | |
| F30 / F35 N20 GA8HP45Z | M10 10.9 |
Replace converter screws. (Remove adhesive residue from thread, if applicable) |
60 Nm | |
| 2AZ Electrical machine to flywheel | GA8P70H | M10 | Replace hexagon nuts. (Remove adhesive residue from thread, if applicable) |
56 Nm |