22 11 Engine mounting

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - ENGINE MOUNTING

	Type	Thread	Tightening specifications	Dimension
1AZ Engine mount to front axle support	F01 / F02 / F03 / F04 / F06 / F07 / F10 / F10 HY / F11 / F12 / F13 / F18 / F20 / F21 / F25 N57 / F30 / F30 HY / F31 / F35	M8 8.8		19 Nm
	F25	M8X45		28 Nm
	F25	M10X30		38 Nm
2AZ Engine mount to engine support arm	F01 / F02 / F03 / F04 / F06 / F07 / F10 / F10 HY / F11 / F12 / F13 / F18	M12 10.9		100 Nm
	F25, F30 - N57 (right engine mount)	M12 10.9		100 Nm
	F20 / F21 / F25 / F30 (without N57)	M10		56 Nm
	F25, F30 - N57 (left engine mount)	M10		56 Nm
	F25	M12		66 Nm
	F30, F31 N47T / F30 HY	M10		55 Nm
	F35	M10		55 Nm
3AZ Engine support arm to engine	F01 / F02 / F03 / F04 / F06 / F07 / F10 / F10 HY / F11 / F12 / F13 / F18 / F20 / F21 / F25 / F30 / F31 / F35	M10 8.8		38 Nm
	F01 N54 / F02 N54 / F07 N55 / F10 N55 / F11 N55 / F20 N55 / F21 N55 / F25 N55 / F30 N55 / F30 HY	M12 8.8		66 Nm
	F01 / F02 / F10, F11 N52T, F10, F11, N53 / F25 N52T	M12x46	Replace screws; jointing torque and angle of rotation must be observed without fail.
			1. Jointing torque	34 Nm
			2. Angle of rotation	90 °
	F20 N13	M10x70, M10x35		56 Nm
4AZ Additional mass to engine support arm, left	F01 / F02 / F06 / F07 / F10 / F10 HY / F11 / F18 / F25	M8 8.8		19 Nm
5AZ Engine support arm to front axle differential (reinforcing plate)	F01, F02, F07 / F25, (Allradfahrzeug)	M8		19 Nm
6AZ Tank ventilation line to engine support arm	F30	M6		13 Nm
7AZ Holder, electric vacuum pump to engine support arm	F30Hyb.			9 Nm