13 62 Sensors for control unit
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Temperature sensor, coolant / oil | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | M12x1.5 | 13.5 Nm | |
| 2AZ Pressure sensor to intake manifold | N63 B44 O 0 | K50x14 | 3.5 Nm | |
| N63 B40 O 1 / N63 B44 O 1 | 4 Nm | |||
| 3AZ Camshaft sensor to cylinder head | N63 B44 O 0 | M6 | 9 Nm | |
| N63 B44 O 0 | K50 | 5 Nm | ||
| N63 B40 O 1 / N63 B44 O 1 | 8 Nm | |||
| 4AZ Crankshaft sensor to transmission | N63 B44 O 0 | M6 | 9 Nm | |
| N63 B40 O 1 / N63 B44 O1 | M6 | 8 Nm | ||
| 5AZ Knock sensor to crankcase | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | M8 | 21.5 Nm | |
| 6AZ Hot film air mass meter to upper section of intake filter housing | N63 B44 O 0 | K50x16 | 3 Nm | |
| N63 B40 O 1 / N63 B44 O 1 | 4 Nm | |||
| 7AZ Pressure sensor to intercooler | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | M6 | 3.2 Nm | |
| 8AZ Intake filter housing upper section to intake filter housing lower section | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | PT50x26/12 | 3.3 Nm | |
| 9AZ Clamp to air duct | N63 B44 O 0 / N63 B40 O 1 / N63 B44 O 1 | 3 Nm |