11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS gear to inlet and exhaust camshafts | N63 | M10x1 | Replace screw | |
| Jointing torque | 30 Nm | |||
| Torque angle | 90 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N63 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N63 | M6 | 10 Nm |