11 65 Turbocharger and Control
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to turbocharger (D80 V-band clamp). | N63 | M8 | Replace V-band clamp | 13 Nm |
| 2AZ Turbocharger to primary catalyst (D108 V-band clamp). | N63 | M8 | Replace V-band clamp | 13 Nm |
| 3AZ Heat protection plate | N63 | M6 x 12 | 10 Nm | |
| 4AZ Heat shield to crankcase, oil return cover or cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 5AZ Heat shield to crankcase. | N63 | M6 x 22 | 10 Nm | |
| 6AZ Vacuum reservoir to crankcase and cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 7AZ Bracket, electropneumatic pressure converter, to cylinder head. | N63 | M6 x 18 | 10 Nm | |
| 8AZ Hexagon nut (2 x) Electropneumatic pressure converter to bracket. |
N63 | BM6 | 10 Nm | |
| 9AZ Blow-off valve to exhaust turbocharger | N63 | M6 | 9 Nm |