11 11 Engine Block, Cylinder Crankcase N63 B44
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750i, and 2015 BMW 750Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATIONS
| Bore stage 0(1) | mm | 89.000 +0.02 | ||
| Bore stage 00 (1) | mm | 89.250 +0.02 | ||
| Bore stage 1 (1) | mm | 89.500 +0.02 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.01 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||