24-0020 Connection

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0491618 240020 Connection Minimum set: Mechanical tools MW

NOTE: (Connections) Oil pressure testing accessory for pressure gauge 13 3 061 or BMW DIS for checking the oil pressure. [Released]

Storage Location

Consisting of:

= 0491619 Hose
NOTE: (Line) Pressure hose 1.7 m, connection M12x1.5 - M14x1.5 outer thread/For checking the different converter pressures/transmission: A4S 310R A4S 270R discontinued, only available via complete tool [cannot be ordered individually]
= 0491620 Connection

Fig 1: Identifying Connection (0491618)
Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: (Connection) For checking the main pressure (3 HP 22, A5S 310Z) and clutch A (ZF transmission)/transmission: 3 HP 22, A5S 310Z, A5S 560Z and all ZF transmissions discontinued; only available via complete tool [cannot be ordered individually]
= 0491621 Connection
NOTE: (Connection) Pipe bend, 145 mm, stretched length 145 mm/transmission: 4HP 22, 4 HP 24 discontinued, only available via complete tool [cannot be ordered individually]
= 0491622 Connection
NOTE: (Connection) Pipe bend, 90 mm straightened length 90 mm, discontinued, only available via complete tool [cannot be ordered individually]
= 0491623 Screw
NOTE: (Connection) Banjo bolt M20x1.5 - M18x1.5/For checking the converter pressure/transmission: 3 HP 12, discontinued, only available via complete tool [cannot be ordered individually]
= 0491624 Connection
NOTE: (Connection) Reducer M24x1.5 - 20x1.5/For checking the main pressure/transmission: 3 HP 20, discontinued, only available via complete tool [cannot be ordered individually]
= 0491625 Connection
NOTE: (Connection) Reducer M20x1.5 - M18x1.5/For checking the main pressure (3 HP 12) an converter pressure (3 HP 20)/Transmission: 3HP 12, 3 HP 20, discontinued, only available via complete tool [cannot be ordered individually]
= 0491626 Screw
NOTE: (Screw) M18x1.5/For closing the engine oil feed pipe when checking the converter pressure/transmission: 3 HP 20, discontinued, only available via complete tool [cannot be ordered individually]
= 0491627 Adapter
NOTE: For closing the feed and return lines when checking the main pressure/transmission: 3 HP 22, discontinued, only available via complete tool [cannot be ordered individually]