33 55 021 Replacing both rubber mounts for anti-roll bar mounting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Lower REAR AXLE SUPPORT .
Release screws (1).
Tightening torque, 33 55 1AZ .
Remove retaining brackets (2).
Slide rubber mount (3) towards vehicle exterior and remove.
Installation note:
Keep retaining bracket (2), rubber mount (3) and anti-roll bar clean and free from oil and grease.
Clean anti-roll bar on both sides. Slide rubber mount with retaining bracket
on anti-roll bar to installation position.